Key Our Cars

I’m going to be making some dice towers in the next week or so and will probably have a couple of spares.  If there’s interest I could make these available for purchase.

As they’re ‘alpha’ bare bones basic designs I’m thinking $25+shipping ($5 to $10 depending on zip for USPS) for them, its roughly $12 for materials counting waste and the rest is for my time which works out to well below minimum wage on an hourly basis FYI.  You’d need to have a Paypal account in order to pay for them as that’s the simplest and least risky for me and it’s strictly as supply is available on a first paid for, first served basis.

If the $12 seems high for materials well you try cutting 3/16″ slots in 2′ boards that are straight and uniform using nothing but a circular saw and see how much waste material you end up that’s good for nothing but template spacers.

The tower will include a catch tray that will be of a size that tower will nest into it when you’re not using it.  You could line it with cork, rubber, foam or felt to reduce the clatter noise but I’ve found personally that the noise isn’t too bad and anything but hard polished wood just causes the squarish (d6′s, d8′s, d4′s) dice to tend to pile up at the mouth of the exit hole.

They may be unstained or stained with black walnut or golden oak depending on what I want to try and will be coated with two coats of polyurethane (either gloss or semi-gloss depending on my on hand supply of poly).  The plexiglass will probably be left clear although I’m going to try a frosted look using an orbital sander on the inside portion and see how that looks.

If you contact me while I still have unfinished towers then you can try requesting specific finishes and stains. Â  As mentioned the only stains I have on hand are black walnut and golden oak (I might have a honey oak somewhere) and for finishes I have semi-gloss and gloss in polyurethane and I might have a  semi-gloss in crystal coat which adds very little coloring to wood unlike poly which has a tinge of yellow.  Really on matters for unstained wood in either case.

If you’d simply like a more detailed photo log of  the process I use to make them so you can build your own I’ll be happy to post that if there’s any interest pending me getting more raw materials as all the material I had on hand I cut already over the weekend.

Use the contact form to send me an email or you can send it to my anti-spam account which is spam at armsnake dot com.